CONTACT CNC Small - Flatpedal
TATZE CONTACT CNC Small - Flatpedal small version
If you have shoe size 35-41 and are looking for a light and grippy pedal, then you are exactly right here!
A pedal should on the one hand fit your foot and on the other hand meet your requirements. That's why the CONTACT CNC comes in different sizes, different colors, and with double-sided usable PINS. These are screwed in with the short side facing up in the delivery state, but if you like it particularly aggressive, you can turn the PINS around and thus extend them.
Minimal weight
The CONTACT CNC Small is a very lightweight pedal at 298g and scores in stability with a high-strength steel axle and a CNC-machined pedal body made of aluminum.
Thin profile
The pedal avoids unwanted ground contact through its thin design, and the open construction allows dirt to fall through the pedal.
High-quality bearings
For the bearings, we use a high-quality IGUS JSM plain bearing inside and two ball bearings outside. Two double-lip seals are installed for sealing, which protect the bearings from dirt and moisture.
Highlights contact cnc Small
- CNC gefräster Pedalkörper
- 10 super griffige PINs
- 298g leicht
- Mehr Bodenfreiheit durch niedrige Bauhöhe
- Mehr Grip durch Überhöhung der PINS
- Igus Gleitlager + 2x Kugellager
Contact CNC SMALL - Produktbeschreibung
Du hast Schuhgröße 35-41 und suchst ein leichtes und griffiges Pedal, dann bist du hier genau richtig!
Ein Pedal sollte einerseits zu deinem Fuß passen und andererseits deine Anforderungen erfüllen. Deshalb gibt es das CONTACT CNC in 2 Größen und verschiedenen Farben. =>
Geringes Gewicht
Beim CONTACT CNC Small wurde größter Wert auf die Stabilität gelegt und trotzdem ist das Pedal mit 298g ein absolutes Leichtgewicht.
Offenes Design
Unerwünschten Bodenkontakt vermeidet das Pedal durch das dünne Design und die offene Konstruktion lässt Schmutz durch das Pedal fallen.
Hochwertige Lager
Bei der Lagerung des CONTACT CNC verwenden wir ein hochwertiges IGUS JSM Gleitlager innen und zwei Kugellager außen. Zur Abdichtung werden zwei Doppelllipendichtringe verbaut, welche die Lager vor Schmutz und Feuchtigkeit schützten.
Fragen und Antworten
Für welchen Einsatzzweck ist das CONTACT CNC SMALL geeignet?
Das Contact CNC SMALL wurde speziell für MountainbikerINNen mit kleineren Füßen entwickelt - für eine passende Aufstandsfläche zur Schuhfläche. Es eignet sich ideal für Touren-, Trail-, All-Mountain-, Enduro-, Downhill- und Dirt-Einsätze.
Was ist im Lieferumfang enthalten?
- Pedale
- Ersatzpins
- Produktbeschreibung
Für welche Schuhgröße ist das Pedal geeignet?
Aufgrund der sehr großen Plattform ist das Pedal von Schuhgröße 35-41 bestens geeignet.
Welche Ersatzteile gibt es?
Wir bieten verschiedene Ersatzteile an, mit denen du dein Pedal langfristig in Top-Zustand halten kannst.
- Refresh-Kit (Tausch der Lager und Dichtungen)
- PIN-Set
Damit kannst du alle wichtigen Komponenten bei Bedarf selbst erneuern und dein Pedal optimal warten.